Draw the objects below using layer Object Line.
Review pages 3-2 through 3-6 for Circle and Rectangle options.
5. Do not dimension, you will learn dimensioning soon.
6. Save the drawing as: Ex-3B
Exercise 3C
Instructions:
1. Start a New file using either the inch-helper.dwt or the metric-helper.dwt
2. Draw the Rectangles below using the options:
Dimension, Chamfer, Fillet, Width and Rotation
3. Use layer Object Line.
4. Save the drawing as: Ex-3C
Rectangle Dimensions:
Length = 3” [76.2 mm]
Width = 2” [50.8 mm]
Chamfer = Dist1 = 0.50” [12.7 mm] Dist2 = 0.50” [12.7 mm]
Rectangle Dimensions:
Length = 3” [76.2 mm]
Width = 2” [50.8 mm]
Fillet = 0.50” [12.7 mm]
Rectangle Dimensions:
Length = 3” [76.2 mm]
Width = 2” [50.8 mm]
Rotation = 45°
Chamfer = 0
Fillet = 0
Rectangle Dimensions:
Length = 3” [76.2 mm]
Width = 2” [50.8 mm]
Line Width = 0.200” [5.08 mm]
Rotation = 0°
Chamfer = 0
Fillet = 0
Exercise 3D
Instructions:
1. Start a New file using either the inch-helper.dwt or the metric-helper.dwt
2. Important: Draw the objects below using the following Layers:
Roof, Wall, Window, Door and Plants
3. You can change Snap and Grid settings to whatever you like.
4. You decide when to turn Ortho and Snap on or off.
5. All objects must be placed accurately. All lines must intersect exactly.
6. Save the drawing as: Ex-3D
Exercise 3E
Instructions:
1. Open Ex-3D. (Use Open not New to open an existing drawing)
2. Make layer Object “current”
(I am having you do that because you can’t Freeze or Lock a layer that is current and I want to make sure that none of the layers that you used in the drawing is current.)
3. Freeze the following layers: Window and Plants (Do not use erase)
4. Lock layer Roof
5. Try to erase any of the roof lines.
You can’t because the Roof layer is Locked.
6. Save the drawing as: Ex-3E
Exercise 3F
Instructions:
1. Start a new file using template: acad.dwt (inch) or acadiso.dwt (metric).
2. Load Linetypes Zigzag, Gas_Line and Dashed (Refer to page 3-16).
3. Create 3 layers named Fence, Gas and Invisible. (Refer to page 3-15.) Assign the Name, Color, Linetype and Lineweight as shown above.
Note: Lineweights for metric users are: Zigzag = 0.5 mm, Gas-Line = 1.2 mm, Dashed = 0.25 mm.
4. Draw the Lines below using the new layers:
A. Select the layer
B. Select the Line command
C. Draw the lines approximately 5 inches [127 mm] long.
D. Ortho (F) on.
5. Save the drawing as: Ex-3F
Exercise 3G
Instructions:
1. Open Ex-3B
2. Open the Layer Properties Manager (Refer to page 3-10).
3.
