Beginning AutoCAD® 2019 Exercise Workbook. Cheryl R. Shrock
Чтение книги онлайн.
Читать онлайн книгу Beginning AutoCAD® 2019 Exercise Workbook - Cheryl R. Shrock страница 5
![Beginning AutoCAD® 2019 Exercise Workbook - Cheryl R. Shrock Beginning AutoCAD® 2019 Exercise Workbook - Cheryl R. Shrock](/cover_pre671824.jpg)
Cheryl R. Shrock is a retired Professor and Chairperson of Computer Aided Design at Orange Coast College in Costa Mesa, California, where she had taught since 1990. Previous to teaching, Cheryl owned and operated a commercial product and machine design company, where designs were created and documented using CAD. She also is an Autodesk® registered author. This Workbook is a combination of her teaching skills and her industry experience.
Steve Heather is a former Lecturer of Mechanical Engineering and Computer Aided Design in England, UK. Previous to teaching and for more than 30 years, he worked as a Precision Engineer in the Aerospace and Defense industries. For the past 10 years Steve has been a Beta Tester for Autodesk®, testing the latest AutoCAD® software. He also is a member of the AutoCAD Customer Council. Steve can be contacted for questions or comments at [email protected]
AutoCAD allows you to customize its configuration. While you are using this Workbook it is necessary for you to make some simple changes to your configuration so our configurations are the same. This will ensure that the commands and exercises work as expected. The following instructions will guide you through those changes.
1. Start AutoCAD
A. To start AutoCAD, follow the instructions on pages 1-2 through to 1-4. Then return to this page and go to Step 2.
2.
A. Type: options anywhere within the main drawing area then press the <Enter> key (not case sensitive).
B. Type: options on the Command Line then press the <Enter> key (not case sensitive).
The text that you type will appear in the Dynamic Input box or on the Command Line, as shown below:
Note:
AutoCAD LT users:
You may find that some of the settings appear slightly different. But they are mostly the same.
Configuration Settings
3. Select the Display Tab and change the settings on your screen to match the dialog box below.
4. Select the Open and Save Tab and change the settings on your screen to match box below.
5. Select the Plot and Publish Tab and change the settings on your screen to match the dialog box below.
6. Select the System Tab and change the settings on your screen to match the dialog box below.
7. Select the User Preferences Tab and change the settings on your screen to match the dialog box below.
8. After making the setting changes shown below select the Apply & Close button.
9. Select the Drafting Tab and change the settings on your screen to match the dialog box below.
10. Select the Selection Tab and change the settings on your screen to match the dialog box below. (Note: The 3D Modeling Tab was skipped. For more on 3D modeling, see the Advanced AutoCAD® and AutoCAD® 3D Modeling Exercise Workbooks.)
11. Select the Apply button.
12. Select the OK button.
13. Now you should be back to the main AutoCAD screen.
A wheel mouse has two or more buttons and a small wheel between the two topside buttons. The default functions for the two top buttons and the Wheel are as follows: Left-Hand button is for input and can’t be reprogrammed.
Right-Hand button is for Enter or the Shortcut Menu.
The Wheel may be used to Zoom and Pan or Zoom and display the Object Snap Menu. You will learn more about this later.
The following describes how to select the Wheel functions. After you understand the functions, you may choose to change the setting.
To change the setting you must use the MBUTTONPAN variable.
MBUTTONPAN setting 1: (Factory setting)
ZOOM | Rotate the wheel forward to zoom in. Rotate the wheel backward to zoom out. |
ZOOM EXTENTS | Double click the wheel to view entire drawing. |
PAN | Press the wheel and drag the mouse to move the drawing on the screen. |
MBUTTONPAN setting 0:
ZOOM | Rotate the wheel forward to zoom in. Rotate the wheel backward to zoom out. |
OBJECT SNAP | Object Snap Menu will appear when you press the wheel. |
To change the setting:
1. Type: mbuttonpan <Enter>.
2. Enter 0 or 1 and then press <Enter>.
LESSONS
LEARNING