the next page.
A Wheel mouse has two or more buttons and a small wheel between the two topside buttons. The default functions for the two top buttons and the Wheel are as follows:
Left Hand button is for input and can’t be reprogrammed. Right Hand button is for Enter or the shortcut menu. The Wheel may be used to Zoom and Pan or Zoom and display the Object Snap menu. You will learn more about this later.
The following describes how to select the Wheel functions. After you understand the functions, you may choose to change the setting.
To change the setting you must use the MBUTTONPAN variable.
MBUTTONPAN setting 1: (Factory setting)
| ZOOM | Rotate the wheel forward to zoom inRotate the wheel backward to zoom out |
| ZOOM EXTENTS | Double click the wheel to view entire drawing |
| PAN | Press the wheel and drag the mouse to move the drawing on the screen. |
MBUTTONPAN setting 0:
| ZOOM | Rotate the wheel forward to zoom inRotate the wheel backward to zoom out |
| OBJECT SNAP | Object Snap menu will appear when you press the wheel |
To change the setting:
1. Type: mbuttonpan <enter>
2. Enter 0 or 1 <enter>
LESSONS
LEARNING OBJECTIVES
After completing this lesson, you will be able to:
1. Start AutoCAD program.
2. Understand AutoCAD Workspaces.
3. Recognize all of the features in the AutoCAD Window.
4. Understand what the keyboard Function keys are used for.
To Start AutoCAD use one of the 2 methods below.
(Be patient it may take a few minutes to load. It is a large program)
1. Select Start / All Programs / Autodesk / AutoCAD 2017 or Double click on the AutoCAD 2017 desktop shortcut icon.
2. The “START” page should appear.
Note: Your computer should be connected to the Internet.
The START page contains two sliding content pages called LEARN and CREATE.
CREATE: The Create page (shown below) is displayed by default and allows you to start a New drawing, Open an existing drawing or template, Explore sample drawings, view Recent documents or access Online Services.
You can access the LEARN page by clicking on LEARN at the bottom of the page or on the left-hand side of the page.
You can start a new drawing using the default template by clicking on the Start Drawing tool, or you can access a list of available templates by clicking on the Templates down
Note: The last template you use will become the new default template and is highlighted in the template dropdown list.
Note:
The drawing template acad.dwt is for inch measurements.
The drawing template acadiso.dwt is for metric measurements.
Click on the Start Drawing tool to open the default template and to open the main AutoCAD drawing workspace.
Note: If your screen does
