level: 3/10 (easy)
To Download the Die-Cut Patterns, please click here.
1. Cut out C1 as shown in the figure. (2 pieces)
2. Cut out C2 as shown in the figure. (2 pieces)
3. Cut out C3 as shown in the figure. (2 pieces)
4. Cut out C4 as shown in the figure. (2 pieces)
5. Cut out C5 as shown in the figure. (2 pieces)
6. Cut out C6 as shown in the figure. (2 pieces)
7. Cut out C7 as shown in the figure. (2 pieces)
8. Cut out C8 as shown in the figure. (2 pieces)
9. Cut out C9 as shown in the figure.
10. Cut out C10 as shown in the figure
11. Fold C3 as shown in the figure.
12. Fold C4 as shown in the figure.
13. Apply glue on the folded edge to join C3 and C4 together as shown in the figure.
14. Fold C7 as shown in the figure.
15. Apply glue on the folded edge to join C7 and C8 together as shown in the figure.
16. Apply glue on the folded edge to join two units together as shown in the figure.
17. It should look like this after step 16 done.
18. Repeat step 11 to 16 to make two components total.
19. Glue C9 on one of the component from step 18 as shown in the figure.
20. Apply glue on the folded edge to join the baseboard as shown in the figure.
21. It should look like this after step 20 done.
22. Take another component from step 18. Apply glue on the folded edge to join the baseboard as shown in the figure.
23. It should look like this after step 22 is done.
24. Fold C1 as shown in the figure.
25. Fold C2 as shown in the figure.
26. Apply glue on the folded edge to join two pieces together as shown in the figure.
27. Fold C5 as shown in the figure.
28. Fold C6 as shown in the figure.
29. Apply glue on the folded edge to join the two pieces together as shown in the figure.
30. Apply glue on the folded edge to join two pieces together as shown in the figure.
31. It should look like this after step 30 is done.
32. Repeat step 24 to 30 to make two components.
33. Take one component from step 32. Apply glue on the folded edge to join baseboard as shown in the figure.
34. It should look like this after step 33 done.
35. Take another component from step 32. Apply glue on the folded edge to join the baseboard as shown in the figure
36. It should look like this after step 35 done.
THE WHITE HOUSE
