Electromagnetic Vortices. Группа авторов
Чтение книги онлайн.
Читать онлайн книгу Electromagnetic Vortices - Группа авторов страница 18
![Electromagnetic Vortices - Группа авторов Electromagnetic Vortices - Группа авторов](/cover_pre1041985.jpg)
Figure 1.5 Far‐field wavefront of (a) Airy disk and (b, c) Laguerre–Gaussian modes. The wavefront of the Airy disk is spherical and the wavefront of Laguerre–Gaussian modes is twisted; (c) at very large distances compared to the wavelength (k0r → ∞), the wavefront of Laguerre–Gaussian approaches a spherical wavefront.
Figure 1.6 Normalized directivities of the Airy disk pattern with aperture diameter D = 4λ and the Laguerre–Gaussian mode with mode number l = 1, same aperture diameter D, and beam waist wg = 0.415D. The directivity of the Laguerre–Gaussian beam is 3 dB less than the Airy disk pattern for this choice of D and wg. The curves are normalized to the maximum directivity of the Airy disk pattern.
To provide further insight in the OAM field distribution at various distances far from the antenna, we studied the changes of amplitude pattern shape from the reactive near‐field toward the far‐field. The first case of study is a conventional reflector antenna with a uniform aperture phase and −10 dB edge taper. The aperture field distribution is modeled using the two‐parameter (2P) model [22, eq. (16)] (for more details see Appendix 1.A), and the field at various distances is calculated using the Fresnel–Kirchhoff diffraction integral [24]. The second case of study is a helicoidal reflector [23]. The aperture field is modeled using the [22, eq. (16)] multiplied by the phase term e−jlϕ, for l = 1. The aperture diameter for both cases is D = 10λ. The changes of amplitude pattern shape from the reactive near‐field toward the far‐field for the two cases is shown in Figure 1.7. The pattern is calculated at r = 4.9λ, 24λ, 8000λ corresponding to the reactive near‐field, radiating near‐field and far‐field regions [25]. It can be observed that the amplitude null at the vortex center is maintained at all distances.
1.3 Communicating Using OAM: Potentials and Challenges
The observation that OAM‐carrying beams exhibit two unique properties compared to conventional beams, namely, the orthogonality and divergence, gives rise to the following question: Can OAM beams’ unique characteristics potentially benefit communication links? We demonstrate that the answer is ‘yes,’ albeit there are still many challenges to overcome before OAM is employed in a practical application. Inspired by this question, we examine possible communication scenarios that involve OAM antennas, review potential applications of OAM beams in communication systems, and discuss technical challenges.
Figure 1.7 Changes of amplitude pattern shape from the reactive near‐field toward the far‐field for (a) a conventional antenna and (b) an OAM antenna. The dimensions are D = 10λ and the pattern is calculated at r = 4.9λ, 24λ, 8000λ corresponding to the reactive near‐field, radiating near‐field and far‐field regions.
1.3.1 OAM Communication Link Scenarios and Technical Barriers
In general, there are two communication links that involve OAM antennas, as shown in Figure 1.8. In the first scenario, an OAM antenna establishes a communication channel with a conventional antenna (the OAM antenna can be transmitting or receiving signals). This case is no different than the classical counterpart, where two conventional antennas are utilized. The link budget is calculated using the classical Friis transmission formula based on the directional properties, distance in terms of wavelength, and orientation of the antennas [26]:
(1.14)
where PR and PT are the received and transmitted powers, respectively, λ is the operating wavelength, d represents the link distance, GT(θt, ϕt), GR(θr, ϕr) correspond to the gains along the transmitting T and receiving R antennas direction; antennas polarization mismatch is neglected for simplicity. The figure of merit of this communication link is the received power (i.e., signal‐to‐noise ratio) at the antenna terminals.
Figure 1.8 OAM possible communication links: (a) OAM to the conventional antenna. The figure of merit is the received power, which is calculated using the classical Friis transmission formula [26].
Source: Based on Friis [26]; (b) OAM to OAM antenna.
The figures of merit are the received power and the detected OAM mode purity, which are calculated using the generalized Friis transmission equation [27]. The OAM beam divergence poses a challenge for far‐field communication distances. A large receiving aperture is required.
Source: Based on Cho and Byun [27].
In the second scenario, two OAM antennas that are facing each other constitute the communication link. The transmitting antenna generates an OAM beam of mode number l, which propagates in free space and is detected by another OAM antenna. The performance of this particular link is characterized by the received power (i.e., signal‐to‐noise ratio) as well as the detected OAM mode purity; a generalized Friis transmission equation that accounts for both the received power and the mode purity has been developed in [27]. A large receiving aperture is required for two reasons. First, a limited aperture would