to disassemble the extractor do is in the following manner.
Figure 10i – Removing the extractor pin
14.With a punch, Glock tool, cartridge head, or appropriate tool remove the extractor pin, refer to Figure 10i.
Figure 10j – Removing the extractor
15.Remove the extractor and spring assembly, refer to Figure 10j. Do not remove the spring assembly, its insert or the O-ring from the extractor unless you are upgrading this to a black buffer, five coil spring and O Ring to enhance the extraction capability.
Lower Receiver
Figure 11a – Depressing the buffer spring retainer
16.The hammer must be in the cocked position. Cock the hammer with your thumb in needed. Push in the buffer and depress the retainer to release the buffer, refer to Figure 11a.
Figure 11b – Removing the buffer
17.Remove the buffer. The buffer is under tension so retain positive control of the buffer as you are removing it from the buffer tube, refer to Figure 11b.
18.This is the end of the operator disassembly of the weapon. Prior to any further disassembly you should seek a qualified gunsmith to instruct you in this. We list the further disassembly for information purposes only.
Конец ознакомительного фрагмента.
Текст предоставлен ООО «ЛитРес».
Прочитайте эту книгу целиком, купив полную легальную версию на ЛитРес.
Безопасно оплатить книгу можно банковской картой Visa, MasterCard, Maestro, со счета мобильного телефона, с платежного терминала, в салоне МТС или Связной, через PayPal, WebMoney, Яндекс.Деньги, QIWI Кошелек, бонусными картами или другим удобным Вам способом.
