biodegradable resin and bamboo and kenaf fibres. Compos. Part A 39: 640–646.8 8 Arao, Y., Fujiura, T., Itani, S., and Tanaka, T. (2015). Strength improvement in injection‐molded jutefiber‐reinforced polylactide green‐composites. Compos. Part B 68: 200–206.
9 9 Khan, Y.H., Islam, A., Sarwar, A. et al. (2016). Novel green nano composites films fabricated by indigenously synthesized graphene oxide and chitosan. Carbohydr. Polym. 146: 1–466. https://doi.org/10.1016/j.carbpol.2016.03.031.
10 10 Mohanty, A.K., Misra, M., and Drzal, L.T. (2002). Sustainable bio‐composites from renewable resources: opportunities and challenges in the green materials world. J. Polym. Environ. 10 (1/2): 19–26.
11 11 Idicula, M., Sreekumar, P.A., Joseph, K., and Thomas, S. (2009). Natural fiber hybrid composites – a comparison between compression molding and resin transfer molding. Polym. Compos. 30: 1417–1425. https://doi.org/10.1002/pc.20706.
12 12 Sreekumar, P.A., Joseph, K., Unnikrishnan, G., and Thomas, S. (2007). A comparative study on mechanical properties of sisal‐leaf fibre‐reinforced polyester composites prepared by resin transfer and compression moulding techniques. Compos. Sci. Technol. 67: 453–461.
13 13 Kim, K.‐W., Lee, B.‐H., Kim, H.‐J. et al. (2012). Thermal and mechanical properties of cassava and pineapple flours‐filled PLA bio‐composites. J. Therm. Anal. Calorim. 108: 1131–1139.
14 14 Feldmann, M. and Bledzki, A.K. (2014). Bio‐based polyamides reinforced with cellulosic fibres – processing and properties. Compos. Sci. Technol. 100: 113–120.
15 15 Sevkat, E. and Tumer, H. (2013). Residual torsional properties of composite shafts subjected to impact loadings. Mater. Des. 51: 956–967.
16 16 Dweib, M.A., Hu, B., Shenton, H.W., and Wool, R.P. (2006). Bio‐based composite roof structure: manufacturing and processing issues. Compos. Struct. 74: 379–388.
17 17 Boey, F.Y.C. and Lye, S.W. (1992). Void reduction in autoclave processing of thermoset composites. Part 1: high pressure effects on void reduction. Composites 23: 261–265.
18 18 Xie, L., Yu, H., Yang, W. et al. (2016). Preparation in vitro degradability cytotoxicity and in vivo biocompatibility of porous hydroxyapatite whisker‐reinforced poly(l‐lactide) biocomposite scaffolds. J. Biomater. Sci. Polym. Ed. 27 (6): 505–528.
19 19 Li, X., Cui, R., Liu, W. et al. (2013). The use of nanoscaled fibers or tubes to improve biocompatibility and bioactivity of biomedical materials. J. Nanomater. 2013: 1–16.
20 20 Lu, L., Peter, S.J., Lyman, M.D. et al. (2000). In vitro degradation of porous poly (l‐lactic acid) foams. Biomaterials 21: 1595–1605.
21 21 Chen, M.K. and Badylak, S.F. (2001). Small bowel tissue engineering using small intestinal submucosa as a scaffold. J. Surg. Res. 99 (2): 352–358.
22 22 Rogers, L., Said, S.S., and Mequanint, K. (2013). The effects of fabrication strategies on 3D scaffold morphology porosity and vascular smooth muscle cell response. J. Biomater. Tissue Eng. 3: 300–311.
23 23 Prasad, A., Sankar, M.R., and Katiyar, V. (2017). State of art on solvent casting particulate leaching method for orthopedic scaffolds fabrication. Mater. Today Proc. 4 (2): 898–907.
24 24 Okamoto, M. (2006). Biodegradable polymer/layered silicate nanocomposites: a review. In: Handbook of Biodegradable Polymeric Materials and their Applications (eds. S. Mallapragada and B. Narasimhan), 153–197. Los Angeles: American Scientific Publishers.
25 25 Kim, S.S., Ahn, K.M., Park, M.S. et al. (2007). A poly(lactideco‐glycolide)/hydroxyapatite composite scaffold with enhanced osteoconductivity. J. Biomed. Mater. Res. Part A 80: 206–215.
26 26 Taylor, P.M., Sachlos, E., Dreger, S.A. et al. (2006). Interaction of human valve interstitial cells with collagen matrices manufactured using rapid prototyping. Biomaterials 27 (13): 2733–2737.
27 27 Aranaz, I., Gutierrez, M.C., Ferrer, M.L., and Monte, F. (2014). Preparation of chitosan nanocomposites with a macroporous structure by unidirectional freezing and subsequent freeze‐drying. Marine Drugs 12 (11): 5619–5642.
28 28 Hottot, A., Vessot, S., and Andrieu, J. (2004). A direct characterization method of the ice morphology relationship between mean crystals size and primary drying times of freeze‐drying processes. Dry. Technol. 22: 2009–2021.
29 29 Das, S., Hollister, S.J., Flanagan, C. et al. (2003). Freeform fabrication of Nylon‐6 tissue engineering scaffolds. Rapid Prototyp. J. 9 (1): 43–49.
30 30 Xie, J., Li, X., and Xia, Y. (2008). Putting electrospun nanofibers to work for biomedical research. Macromol. Rapid Commun. 29: 1775–1792.
31 31 Xu, X. and Zhou, M. (2008). Antimicrobial gelatin nanofibers containing silver nanoparticles. Fibers Polym. 9: 685–690.
32 32 Hong, H., Dong, N., Shi, J. et al. (2009). Fabrication of a novel hybrid heart valve leaflet for tissue engineering: an in vitro study. Artif. Organs 33: 554–558.
33 33 Jahnavi, S., Kumary, T., Bhuvaneshwar, G. et al. (2015). Engineering of a polymer layered bio‐hybrid heart valve scaffold. Mater. Sci. Eng. C 51: 263–273.
34 34 Malheiro, V.N., Caridade, S.G., Alves, N.M., and Mano, J.F. (2010). New poly(ε‐caprolactone)/chitosan blend fibers for tissue engineering applications. Acta Biomater. 6 (2): 418–428.
35 35 Nirmal, R.S. and Nair, P.D. (2013). Significance of soluble growth factors in the chondrogenic response of human umbilical cord matrix stem cells in a porous three‐dimensional scaffold. Eur. Cells Mater. 26: 234–251.
36 36 Dutta, P.K., Tripathi, S., Mehrotra, G.K., and Dutta, J. (2009). Perspectives for chitosan based antimicrobial films in food applications. Food Chem. 114 (4): 1173–1182.
37 37 Al‐Hassan, A.A. and Norziah, M.H. (2012). Starch–gelatin edible films: water vaporpermeability and mechanical properties as affected by plasticizers. Food Hydrocoll. 26 (1): 108–117.
38 38 Yu, Z., Alsammarraie, F.K., Nayigiziki, F.X. et al. (2017). Effect and mechanism of cellulose nanofibrils on the active functions of biopolymer‐based nanocomposite films. Food Res. Int. 99 (1): 166–172.
39 39 Dang, K.M. and Yoksan, R. (2016). Morphological characteristics and barrier properties of thermoplastic starch/chitosan blown film. Carbohydr. Polym. 150: 40–47.
40 40 Wu, J., Li, Y., and Zhang, Y. (2017). Use of intraoral scanning and 3‐dimensional printing in the fabrication of a removable partial denture for a patient with limited mouth opening. J. Am. Dent. Assoc. 148 (5): 338–341.
41 41 Gross, B.C., Erkal, J.L., Lockwood, S.Y. et al. (2014). Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. Anal. Chem. 86 (7): 3240–3253.
42 42 Zopf, D.A., Hollister, S.J., Nelson, M.E. et al. (2013). Bioresorbable airway splint created with a three‐dimensional printer. N. Engl. J. Med. 368 (21): 2043–2045.
43 43 Schubert, C., Langeveld, M.C., and Donoso, L.A. (2014). Innovations in 3D printing: a 3D overview from optics to organs. Br. J. Ophthalmol. 98 (2): 159–161.
44 44 Roh, H.S., Lee, C.M., Hwang, Y.H. et al. (2017). Addition of MgO nanoparticles and plasma surface
