the pressure gauge and seal on your pressure canner tested every year for accuracy. (Weighted gauges don’t require testing.) This service is often offered for free at your local cooperative extension office.
Use jars and two-piece caps that are made for home-canning. Discard any jars that are cracked or nicked.
Never use single-use sealing lids a second time. Always use new lids. The sealant on the underside of the lid is good for only one processing. If your jars do not seal the first time, always replace the lid with a fresh one. There may be a problem with the sealant, despite starting with a new lid.
Check the rubber gasket on reusable lids for signs of wear. With proper care, gaskets can be reused up to eight times before needing to be replaced, depending on whether you are pressure canning or water-bath canning.
Knowing the Acidity Level of Your Food
Knowing the acidity level of the food you’re processing is important because the pH, the measure of acidity, determines which canning method you use: water-bath or pressure canning.
For canning purposes, food is divided into two categories based on the amount of acid the food registers:
High-acid foods include fruits and pickled foods. (For detailed information on identifying and processing high-acid food, refer to Chapter 4.) Foods in this group have a pH of 4.6 or lower. Processing them in a water-bath canner destroys harmful microorganisms.Tomatoes are considered a low-high acid food (or in the low range of high-acid foods). With all of the new varieties of tomatoes, it is now recommended that the home canner add an acid to the canning process, to ensure that the proper acidity is reached every time.
Low-acid foods, primarily vegetables, meat, poultry, and fish, contain little natural acid. Their pH level is higher than 4.6. (Check out Chapter 9 for detailed information on identifying and processing low-acid food.) Process these foods in a pressure canner, which superheats your food and destroys the more heat-resistant bacteria, like botulism.
Adjusting for Your Altitude
Properly processing your home-canned foods destroys microorganisms. Knowing your altitude is important because the boiling point of water and pressure in a pressure canner changes at altitudes over 1,000 feet above sea level. This occurs because the air is thinner at higher elevations. With less air resistance, water boils at a temperature below 212 degrees.
To produce food free from microorganisms at higher elevations, adjust your processing time and pressure to compensate for your altitude. Use the altitude adjustment charts in Chapter 4 (for water-bath canning) and in Chapter 9 (for pressure canning). These adjustments ensure that your food is heated to the correct temperature for destroying microorganisms.
www.whatismyelevation.com and simply type in your Zip code.
Spoiler Alert: Identifying Food Spoilage
Food spoilage is the unwanted deterioration in canned or preserved food that makes your food unsafe for eating. Ingesting spoiled food causes a wide range of ailments, depending on the type of spoilage and the amount of food consumed. Symptoms vary from mild, flu-like aches and pains to more-serious illnesses or even death.
But having said that, the potential for spoiled food shouldn’t stop you from canning. When you understand the workings of these microscopic organisms and enzymes, you’ll know why using the correct processing method for the correct amount of time destroys these potentially dangerous food spoilers. And you’ll have nothing to worry about.
Meeting the spoilers
Mold, yeast, bacteria, and enzymes are the four spoilers. Microorganisms (mold, yeast, and bacteria) are independent organisms of microscopic size. Enzymes are proteins that exist in plants and animals. When one or more of these spoilers have a suitable environment, they grow rapidly and divide or reproduce every 10 to 30 minutes! With this high-speed development, it’s obvious how quickly food can spoil. Some of these create spoilage that can’t be seen with the naked eye (like botulism), while others (like mold) make their presence known visually.
Mold
Mold is a fungus with dry spores. Poorly sealed jars of high-acid or pickled foods are perfect locations for these spores to set up housekeeping. After the spores float through the air and settle on one of their favorite foods, they start growing. At first you see what looks like silken threads, then streaks of color, and finally fuzz, which covers the food. Processing high-acid and pickled food in a water-bath canner destroys mold spores.
Yeast
Yeast spores are much less colorful, and grow in food in the same way as mold spores. They’re particularly fond of high-acid food that contains lots of sugar, like jam or jelly. They grow as a dry film on the surface of your food, more commonly inside the food, creating an off flavor and fermentation. Prevent yeast spores from fermenting in your food by destroying them in a water-bath
