Flow-Induced Vibration Handbook for Nuclear and Process Equipment. Группа авторов

Чтение книги онлайн.

Читать онлайн книгу Flow-Induced Vibration Handbook for Nuclear and Process Equipment - Группа авторов страница 6

Flow-Induced Vibration Handbook for Nuclear and Process Equipment - Группа авторов

Скачать книгу

Rates (Fisher et al, 1990).Fig. 13-5 Effect of Contact Force Level on Fretting‐Wear Rates (Ko, 1979a)....Fig. 13-6 Room‐Temperature Fretting‐Wear Machine.Fig. 13-7 Force Transducer Assembly for Room‐Temperature Machine (Ko, 1985a)...Fig. 13-8 Wear Rate versus Work‐Rate for Incoloy 800 Tubing and Inconel 600 ...Fig. 13-9 Schematic of an Impact Fretting‐Wear Test Machine (Pettigrew et al...Fig. 13-10 Two High‐Temperature Machines Used at AECL‐CNL (Guérout and Fishe...Fig. 13-11 Isometric 3-D Wear Profile (Specimen C297 PT‐124) (Fisher et al, ...Fig. 13-12 Bearing Pad and Pressure Tube Specimens Installed in the Wear Mac...Fig. 13-13 Schematic of the SAI Motion Type (Fisher et al, 1990).Fig. 13-14 Effect of Temperature on Pressure Tube Fretting Wear (Fisher et a...Fig. 13-15 Effect of Dissolved Oxygen Content on Pressure Tube Fretting Wear...Fig. 13-16 Wear Map for the X40 Alloy (Saito and Mino, 1995).Fig. 13-17 Effect of Temperature on Steam Generator Tube Fretting Wear (Fish...Fig. 13-18 Topographic SEM Photographs of Fret Marks (Fisher et al, 2002).Fig. 13-19 Incoloy 800 Tubing and Type 410 Stainless Steel Support Specimens...Fig. 13-20 Incoloy 800 Tubing and Type 410 Stainless Steel Fretting‐Wear Cur...Fig. 13-21 Displacement Plots ‐ Drilled‐Hole Test (Fisher et al, 1995).Fig. 13-22 Drilled‐Hole Test Results (Fisher et al, 1995).Fig. 13-23 Displacement Plots ‐ Broached‐Hole Test (Fisher et al, 1995).Fig. 13-24 Broached‐Hole Test Results (Fisher et al, 1995).Fig. 13-25 Inconel 600 Tubing and Carbon Steel Fretting‐Wear Curve (Fisher e...Fig. 13-26 SEM Photograph at 40x Magnification of the Worn Surface of the In...Fig. 13-27 Typical Tube‐to‐Support Relative Motion: a) Flat‐Bar Support and ...Fig. 13-28 Effect of Temperature on Fretting‐Wear Coefficients for Incoloy 8...Fig. 13-29 Effect of Temperature on Fretting‐Wear Coefficients for Incoloy 8...Fig. 13-30 Effect of Steam Generator Chemistry Control on Fretting Wear of I...Fig. 13-31 Tube‐to‐Drilled‐Hole‐Support Relative Motion (Guérout and Fisher,...Fig. 13-32 Effect of Boric Acid on Fretting Wear of Inconel 600 Tubing and T...Fig. 13-33 Effect of Support Geometry on Fretting Wear of Incoloy 800 Tubing...Fig. 13-34 Effect of Tube Material on Fretting Wear for Type 410 Stainless S...Fig. 13-35 Fretting‐Wear Results at High Temperature for Various Types of No...Fig. 13-36 Fretting‐Wear Results of Incoloy 800 Tubing versus Type 321 Stain...

      14 Appendix AFig. 3-5 Example 3-1 ‐ Process Heat Exchanger Schematic.Fig. 11-10 Fluctuating Force Lift Coefficients for Tube Bundles in Single‐Ph...Fig. 3-6 Example 3-2 ‐ U‐Bend Schematic.Fig. 10-14 Steam‐Water and Freon Flow Regime Maps.Fig. 12-14a Contact Between a Steam Generator Tube and Flat‐Bar‐Type (AVB) S...Fig. A-1 Wear Volume versus Wear Depth.

      Guide

      1  Cover Page

      2  Series Page

      3  Title Page

      4  Copyright Page

      5  Preface

      6  Acknowledgments

      7  Contributors

      8  Table of Contents

      9  Begin Reading

      10  Appendix A

      11  Subject Index

      12  Wiley End User License Agreement

      Pages

      1  ii

      2  iii

      3  xv

      4  xvii

      5  xviii

      6  xix

      7  1

      8  2

      9  3

      10  4

      11  5

      12  6

      13  7

      14  8

      15  9

      16  10

      17 11

      18  13

      19  14

      20  15

      21  16

      22  17

      23  18

      24  19

      25  20

Скачать книгу