based mixtures as promising food material in 3D food printing. Journal of Food Engineering 261: 76–86. https://doi.org/10.1016/j.jfoodeng.2019.03.016.4 Dai, F.‐J. and Chau, C.‐F. (2017). Classification and regulatory perspectives of dietary fiber. Journal of Food and Drug Analysis 25 (1): 37–42.
5 Devi, A. and Khatkar, B.S. (2016). Physicochemical, rheological and functional properties of fats and oils in relation to cookie quality: a review. Journal of Food Science and Technology 53 (10): 3633–3641.
6 Dick, A., Bhandari, B., and Prakash, S. (2019). Post‐processing feasibility of composite‐layer 3D printed beef. Meat Science 153: 9–18. https://doi.org/10.1016/j.meatsci.2019.02.024.
7 Dong, X., Huang, Y., Pan, Y. et al. (2019). Investigation of sweet potato starch as structural enhancer for 3D printing of Scomberomorus niphonius surimi. Journal of Texture Studies 50: 316–324. https://doi.org/10.1111/jtxs.12398.
8 Godoi, F.C., Prakash, S., and Bhandari, B.R. (2016). 3d printing technologies applied for food design: status and prospects. Journal of Food Engineering 179: 44–54.
9 Godoi, F.C., Bhandari, B.R., Prakash, S., and Zhang, M. (2019). An introduction to the principles of 3D food printing. In: Fundamentals of 3D Food Printing and Applications (eds. F.C. Godoi, B.R. Bhandari, S. Prakash and M. Zhang), pp. 1–18. Elsevier.
10 Hoffman, J.R. (2019). Dietary Supplementation in Sport and Exercise: Evidence, Safety and Ergogenic Benefits. Routledge.
11 Huang, M., Zhang, M., and Bhandari, B. (2019). Assessing the 3D printing precision and texture properties of brown rice induced by infill levels and printing variables. Food and Bioprocess Technology 12: 1–12. https://doi.org/10.1007/s11947‐019‐02287‐x.
12 Kim, H.W., Bae, H., and Park, H.J. (2018). Classification of the printability of selected food for 3D printing: development of an assessment method using hydrocolloids as reference material. Journal of Food Engineering 215: 23–32.
13 Krishnaraj, P., Anukiruthika, T., Choudhary, P. et al. (2019). 3D extrusion printing and post‐processing of fibre‐rich snack from indigenous composite flour. Food and Bioprocess Technology 12 (10): 1776–1786. https://doi.org/10.1007/s11947‐019‐02336‐5.
14 Lanaro, M., Desselle, M.R., and Woodruff, M.A. (2019). 3D printing chocolate: properties of formulations for extrusion, sintering, binding and ink jetting. In: Fundamentals of 3D Food Printing and Applications (eds. F.C. Godoi, B.R. Bhandari, S. Prakash and M. Zhang), pp. 151–173. United Kingdom: Academic Press.
15 Lassé, M., Deb‐Choudhury, S., Haines, S. et al. (2015). The impact of pH, salt concentration and heat on digestibility and amino acid modification in egg white protein. Journal of Food Composition and Analysis 38: 42–48.
16 Le Tohic, C., O’Sullivan, J.J., Drapala, K.P. et al. (2018). Effect of 3D printing on the structure and textural properties of processed cheese. Journal of Food Engineering 220: 56–64.
17 Lee, J.H., Won, D.J., Kim, H.W., and Park, H.J. (2019). Effect of particle size on 3D printing performance of the food‐ink system with cellular food materials. Journal of Food Engineering 256: 1–8. https://doi.org/10.1016/j.jfoodeng.2019.03.014.
18 Li, J.‐M. and Nie, S.‐P. (2016). The functional and nutritional aspects of hydrocolloids in foods. Food Hydrocolloids 53: 46–61.
19 Lille, M., Nurmela, A., Nordlund, E. et al. (2018). Applicability of protein and fiber‐rich food materials in extrusion‐based 3D printing. Journal of Food Engineering 220: 20–27.
20 Liu, Z., Zhang, M., Bhandari, B., and Yang, C. (2018). Impact of rheological properties of mashed potatoes on 3D printing. Journal of Food Engineering 220: 76–82. https://doi.org/10.1016/j.jfoodeng.2017.04.017.
21 Liu, Y., Liang, X., Saeed, A. et al. (2019). Properties of 3D printed dough and optimization of printing parameters. Innovative Food Science and Emerging Technologies 54: 9–18. https://doi.org/10.1016/J.IFSET.2019.03.008.
22 Mantihal, S., Prakash, S., Godoi, F.C., and Bhandari, B. (2017). Optimization of chocolate 3D printing by correlating thermal and flow properties with 3D structure modeling. Innovative Food Science and Emerging Technologies 44: 21–29. https://doi.org/10.1016/j.ifset.2017.09.012.
23 Mehta, N., Chatli, M.K., Kumar, P. et al. (2019). Development of dietary fiber‐rich meat products: technological advancements and functional significance. In: Bioactive Molecules in Food, Reference Series in Phytochemistry (eds. J.M. Mérillon and K. Ramawat). Cham: Springer https://doi.org/10.1007/978‐3‐319‐78030‐6_9.
24 Nachal, N., Moses, J.A., Karthik, P., and Anandharamakrishnan, C. (2019). Applications of 3D printing in food processing. Food Engineering Reviews 11 (3): 123–141. https://doi.org/10.1007/s12393‐019‐09199‐8.
25 Perez, B., Nykvist, H., Brogger, A.F. et al. (2019). Impact of macronutrients printability and 3D‐printer parameters on 3D‐food printing: a review. Food Chemistry 287 (October 2018): 249–257. https://doi.org/10.1016/j.foodchem.2019.02.090.
26 Phan, M.M. and Stodolska, M. (2019). Food practices, dietary patterns, and leisure among Mexican Americans in the Midwestern US. Annals of Leisure Research 23: 1–18.
27 Prakash, S., Bhandari, B.R., Godoi, F.C., and Zhang, M. (2019). Future outlook of 3D food printing. In: Fundamentals of 3D Food Printing and Applications (eds. F.C. Godoi, B.R. Bhandari, S. Prakash and M. Zhang), pp. 373–381. Elsevier.
28 Ramadoss, B.R., Gangola, M.P., Agasimani, S. et al. (2019). Starch granule size and amylopectin chain length influence starch in vitro enzymatic digestibility in selected rice mutants with similar amylose concentration. Journal of Food Science and Technology 56 (1): 391–400.
29 Sammugam, L. and Pasupuleti, V.R. (2019). Balanced diets in food systems: emerging trends and challenges for human health. Critical Reviews in Food Science and Nutrition 59 (17): 2746–2759.
30 Severini, C., Derossi, A., Ricci, I. et al. (2018). Printing a blend of fruit and vegetables. New advances on critical variables and shelf life of 3D edible objects. Journal of Food Engineering 220: 89–100. https://doi.org/10.1016/j.jfoodeng.2017.08.025.
31 Southerland, D., Walters, P., and Huson, D. (2011). Edible 3D printing. NIP & Digital Fabrication Conference 2011 (2): 819–822.
32 Sun, J., Zhou, W., Huang, D. et al. (2015). An overview of 3D printing technologies for food fabrication. Food and Bioprocess Technology 8 (8): 1605–1615.
33 Sun, J., Zhou, W., Huang, D., and Yan, L. (2018). 3D food printing: perspectives. In: Polymers for Food Applications
