Название:
Автор:
Жанр:
Серия:
Издательство:
Principles•Type ‘B’ Standards
| EN 614-1 | Ergonomic Design Principles — Terminology and General Principles |
| EN 547-3 | Human Body Measurements — Anthropometric Data |
| EN 1005-1 | Human Physical Performance — Terms and Definitions |
| EN 1005-2 | Human Physical Performance — Manual Handling of Machinery and Component Parts of Machinery |
| EN 1005-3 | Human Physical Performance — Recommended Force Limits for Machinery Operation |
| EN 1005-4 | Human Physical Performance — Evaluation of Working Postures and Movements in Relation to Machinery |
| EN 1005-5 | Human Physical Performance — Risk Assessment for Repetitive Handling at High Frequency |
| ISO 14738 | Safety of Machinery — Anthropometric Requirements for the Design of Workstations at Machinery |
| EN 349 | Minimum Gaps to Avoid Crushing of Parts of the Human Body |
| ISO 13854 | Minimum Gaps to Avoid Crushing of Parts of the Human Body |
| EN 294 | Safety Distances to Prevent Danger Zones being Reached by the Upper Limbs |
| ISO 13852 | Safety Distances to Prevent Hazard Zones being Reached by the Upper Limbs |
| EN 811 | Safety Distances to Prevent Danger Zones being Reached by the Lower Limbs |
| ISO 13853 | Safety Distances to Prevent Hazard Zones being Reached by the Lower Limbs |
| ISO 13857 | Safety Distances to Prevent Hazard Zones being Reached by Upper and Lower Limbs |
| ISO 13855 | Safety of Machinery — Positioning of Safeguards with Respect to the Approach Speeds of Parts of the Human Body |
| EN 999 | The Positioning of Protective Equipment in Respect of Approach Speeds of Parts of the Human Body |
| EN 547-1 | Human Body Measurements — Principles for Determining the Dimensions Required for Openings for Whole-Body Access into Machinery |
| EN 547-2 | Human Body Measurements — Principles for Determining the Dimensions Required for Access Openings |
| ISO 15534 (series) | (parts 1 thru 3) Ergonomic Design for the Safety of Machinery (relative to access openings) |
| EN 563 | Temperatures of Touchable Surfaces — Ergonomics Data to Establish Temperature Limit Values for Hot Surfaces |
| ISO 13732-1 | Ergonomics of the Thermal Environment — Methods for the Assessment of Human Responses to Contact with Surfaces — Part 1: Hot Surfaces |
| ISO 13732-3 | Ergonomics of the Thermal Environment — Methods for the Assessment of Human Responses to Contact with Surfaces — Part 3: Cold Surfaces |
| ANSI B11.19 | Performance Criteria for Safeguarding |
| ISO 14120 | Safety of Machinery — Guards — General Requirements for the Design and Construction of Fixed and Movable Guards |
| EN 953 | Guards — General Requirements for the Design and Construction of Fixed and Movable Guards |
| CSA-Z432-04 | Safeguarding of Machines |
| ANSI B15.1 | Safety Standard for Mechanical Power Transmission Apparatus (including ANSI B15.1 Interpretation) |
| ISO 14119 | Safety of Machinery — Interlocking Devices Associated with Guards — Principles for Design and Selection (also Amendment 1:2007 — Design to Minimize Defeat Possibilities) |
| EN 1088 | Interlocking Devices Associated with Guards — Principles for Design and Selection |
| IEC 61496-117 | Safety of Machinery — Electro-Sensitive Protective Equipment — General Requirements and Tests |
| IEC 61496-217 | Safety of Machinery — Electro-Sensitive Protective Equipment — Particular Requirements for Equipment Using Active Opto-Electronic Protective Devices |
| EN 982 | Safety Requirements for Fluid Power Systems and their Components — Hydraulics |
| ISO 4413 | Hydraulic Fluid Power— General Rules and Safety Requirements for Systems and their Components |
| EN 983 | Safety Requirements for Fluid Power Systems and their Components — Pneumatics |
| ISO 4414 | Pneumatic Fluid Power— General Rules and Safety Requirements for Systems and their Components |
| EN 842 | Visual Danger Signals, General Requirements, Design and Testing |
| EN 457 | Audible Danger Signals, General Requirements, Design and Testing |
| EN 981 | System of Auditory and Visual Danger and Information Signals |
| ISO 13850 | Safety of Machinery — Emergency Stop — Principles for Design |
| EN 13850 | Emergency Stop — Principles for Design |
| EN 418 | Emergency Stop Equipment, Functional Aspects — Principles for Design |
| ISO 13851 | Safety of Machinery — Two-Hand Control Devices — Functional Aspects and Design Principles |
| EN 574 | Two-Hand Control Devices — Functional Aspects — Principles for Design |
| EN 954-1 | Safety-Related Parts of Control Systems — General Principles of Design |
| ISO 13849-1 | Safety-Related Parts of Control Systems (ISO 13849-1 replaces EN 954-1) |
| EN 1037 | Prevention of Unexpected Start-Up |
| ISO 14118 | Safety of Machinery — Prevention of Unexpected Start-Up |
| ANSI/ASSE Z244.1 | Control of Hazardous Energy, Lockout/Tagout and Alternative Methods |
| CSA-Z460 | Control of Hazardous Energy — Lockout and Other Methods |
| ISO 14123 (series) | (parts 1 and 2) Safety of Machinery — Reduction of Risks to Health from Hazardous Substances Emitted by Machinery |
| EN 626-1 | Reduction of Risks to Health from Hazardous Substance Emitted by Machinery — Principles and Specifications for Machinery Manufacturers |
| EN 1127-1 | Explosive Atmospheres — Explosion Prevention and Protection |
| ANSI B11.20 | Safety Requirements for Integrated Manufacturing Systems |
| ANSI/RIAR 15.06 | Safety Standard for Industrial Robots and Robot Systems |
| ISO 10218-1 | Robots and Robotic Devices — Safety Requirements — Industrial Robots |
| ISO 10218-2 | Robots and Robotic Devices — Safety Requirements — Industrial Robot Systems and Integration |
| UL 1740 | Standard for Robots and Robotic Equipment |
| ISO 11161 | Safety of Machinery — Integrated Manufacturing Systems — Basic Requirements |
| CSA-Z434 | Industrial Robots and Robot Systems — General Safety Requirements |
| ANSI A12.1 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards |
| ANSI/ASSE
|
